联系我们
软管泵工业软管泵每一处都是匠心制作
更新时间：2025-05-30 21:11:57 ip归属地：兴安，天气：阴转小雨，温度：17-32 浏览次数:12 公司名称：焦作 豫信致诚机械设备(兴安市分公司)
| 产品参数 | |
|---|---|
| 产品价格 | 电议 |
| 发货期限 | 电议 |
| 供货总量 | 电议 |
| 运费说明 | 电议 |
| 规格型号 | YXRG-15 (200) |
| 流量 | 2~85立方/小时 |
| 功率 | 1.5~35kw |
| 压力 | 1Mpa~2Mpa |
| 重量 | 60~2000kg |
| 水平输送能力 | 100m |
| 垂直输送 | 3~15m |
| 软管泵吸程 | 8m |
| 软管尺寸 | 按规格定制 |
| 设备类型 | 小型软管泵 |
| 设备用途 | 工业软管泵、输送软管泵 |
| 工作原理 | 滚轴挤压式循环往复 |
| 参考价格 | 5000~85000 |
| 耐腐蚀性输送性能 | 可输送 |
| 食品果酱输送性能 | 可升级为不锈钢型软管泵，食品级软管 |
| 其他行业应用 | 根据输送物质类型，定制设计加工 |
| 交货周期 | 小型软管泵现货，大型定制 |
| 付款方式 | 预付30%，剩余货到付清 |
豫信致诚机械设备(兴安市分公司)将以高性能的产品、合理的价格吸引各方来宾、专业的售前售后服务打动顾客；让顾客因创造价值而满意，做永远的朋友！
软管泵的典型用途：
化工行业，各种防腐蚀浆料和无机盐物料；石油、钻井、水处理、泥浆、石灰浆；采矿冶金的充填物料，矿浆输送；食品行业，油类物料及饮料，糊状料输送；造纸行业，纸浆、硫磺输送；建筑业，水泥沙浆、泡沫混凝土生产线，楼顶屋泡沫轻质流体物料；油漆、涂料、钛 、二氧化碳等物料输送。
Typical use of hose pump:
Chemical industry, various anti-corrosion slurry and inorganic salt materials; petroleum, drilling, water treatment, mud, lime slurry; filling materials for mining and metallurgy, slurry transportation; food industry, transportation of oil materials and beverages, paste; papermaking Industry, pulp and sulfur transportation; construction industry, cement mortar, foam concrete production line, rooftop foam light fluid materials; paint, coating, titanium dioxide, carbon dioxide and other materials transportation.
单管软管泵特点:
动力消耗少，可计量输出；易损件少，更换时间短；独特无密封结构，不会产生泄露；自吸能力强，可达8米；可正反向运转，具有自清理能力；压轴采用滚动摩擦，泵腔无需加油；结构简单，操作维修方便；出口压力 可达1.6Mpa；输送高粘度、高固含量、固体颗粒、纤维物质、及其他杂志等液物料，不会产生任何堵塞。
Less power consumption, accurate metering output; less wearing parts, short replacement time; unique non-sealed structure, no leakage; strong self-priming ability, up to 8 meters; can run forward and reverse, with self-cleaning ability; final shaft Rolling friction, no need to refuel the pump cavity; simple structure, convenient operation and maintenance; outlet pressure up to 1.6Mpa; conveying high viscosity, high solid content, solid particles, fibrous material, and other magazines and other liquid materials, without any blockage .
软管泵是由泵壳、转子体、机座、软管、减速电机以及电控系统等部分组成。转子体旋转，转子体上的一对压辊沿着一根特制的胶管旋转，压辊与泵壳产生的挤压力将胶管压扁，在管子自身弹性和侧导辊的作用下，通过恢复原状产生的真空吸入物料，物料从管内排出，这样往复循环。
The hose pump is composed of pump casing, rotor body, frame, hose, reduction motor and electronic control system. The rotor body rotates, and a pair of pressure rollers on the rotor body rotates along a special rubber hose. The squeezing force generated by the pressure roller and the pump casing will flatten the rubber hose. The elasticity of the tube and the side guide rollers restore the The vacuum produced by the original state sucks the material, and the material is discharged from the tube, so as to reciprocate.
